may want to increase the computer's memory if you use
complex software or process large amounts of data.
Installing a memory module
An additional memory module can be installed in the
memory module slot on the base of the computer. You will
need a standard Phillips No. 1 screwdriver for this procedure.
The computer has one memory module slot. You can install
one memory module.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1
If the computer is on, click Start, Turn off computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer, including the AC adapter cord/cable.
To avoid damaging the computer's screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
hibernation mode, data will be lost.
Getting Started
Adding memory
49