Toshiba libretto U105 Series User Manual page 178

178
Toshiba Utilities
Fingerprint recognition utility
❖
Once you gain access to Vault Management, click
Manage Identities under Vault Settings (as shown
above). Only the identities of the currently logged in
OmniPass user can be managed.
To add a new identity:
❖
Click New Identity or double-click <Click here to add
a new identity>.
❖
Name the new identity and click OK.
❖
Click Apply to ensure the settings are saved.
❖
You can now switch to the new identity and start
remembering passwords.
To delete an identity:
❖
Highlight the identity you want to delete and click Delete
Identity.
❖
Click Apply to ensure the settings are saved.
When you delete an identity, all the sites and password
protected dialogs associated with the identity are no longer
remembered.
To set the default identity:
❖
Highlight the identity you want to be the default.
❖
Click Set as Default.
❖
Click Apply to ensure the settings are saved.
NOTE
If you log in to OmniPass using the fingerprint sensor, you will
automatically be logged in to the default identity for that
OmniPass user. In order to choose the user identity at login,
you must log in using the master password. For more
information, see the following section.