Toshiba R100 User Manual page 83

Using optional external diskettes and discs
1 If the computer is turned on, press the eject button on the
DVD-ROM or multi-function drive.
The disc tray partially opens.
To avoid damaging a disc or losing data, check that the disc
activity light is off before opening the disc tray.
2 Grasp the disc tray and pull it fully open.
3 Hold the disc by its edges and check that it is clean and
free of dust.
Handle discs carefully. Avoid touching the surface of the disc.
Grasp it by its center hole and edge. If you handle the disc
incorrectly, you could lose data.
4 Carefully place the disc in the empty tray with its label
facing up.
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the
drive to malfunction.
5 Gently press the center of the disc onto the spindle until it
locks into place.
Make sure the disc is properly positioned on the spindle. If
you position the disc incorrectly, it can jam the disc tray.
6 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.
Learning the Basics
83