Display Problems - Toshiba R100 User Manual

You have connected an external keyboard and the
operating system displays one or more keyboard error
messages.
If you have a second keyboard, try it. If it works, the first
keyboard may be defective or incompatible with your
computer.

Display problems

Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by
pressing
password, press any key, type the password and press
no password is registered, press any key. The screen
reactivates and allows you to continue working.
If you are using the built-in screen, make sure the display
priority is not set for an external monitor. To do this, press
and
F5
problem, press
display priority to its previous setting.
If you are using an external monitor:
❖
Check that the monitor is turned on.
❖
Check that the monitor's power cable is firmly plugged
into a working power outlet.
❖
Check that the cable connecting the external monitor to
the computer is firmly attached.
❖
Try adjusting the contrast and brightness controls on the
external monitor.
❖
Press
priority is not set for the built-in screen.
and simultaneously. If you have registered a
Fn F1
simultaneously (once). If this does not correct the
and
Fn
and simultaneously to make sure the display
Fn F5
If Something Goes Wrong
Resolving a hardware conflict
simultaneously again to return the
F5
187
. If
Enter
Fn