General Usage Notes - Universal Audio Apollo Twin Customer Support Information

10/8/2015
2. Press the Level knob (1) to mute the monitor outputs. The Volume Level Indicator LEDs (2) are red when the monitors are
muted and Monitor is selected (6).
3. To toggle the monitor mute state, press the Level knob (1) whenever Monitor (6) is selected.
Notes:
*The Hi­Z input is automatically selected, overriding the channel 1 Mic and Line inputs, when a ¼" mono TS (tip­sleeve) plug is
connected to the Hi­Z Instrument jack (12) on the front panel.
To control both channels simultaneously when a stereo source is connected, press the LINK button (11) when an input is
selected (9).
Line outputs 3 & 4 are accessed and controlled via software only (Console or DAW).
What Next?
Refer to the Apollo Software Manual to learn how to configure the audio interface settings, use the Console application and
Realtime UAD Processing for live input monitoring, use the Console Recall plug­in in a DAW, and much more.
Exploring Console
Opening Console
To open the application, click its icon in the Mac OS X Dock.
Explore the interface
For complete Console details, see the Apollo Software Manual.
General Usage Notes
Console Application
(Apollo Twin DUO only) Realtime UAD Processing with UAD plug­ins in Console uses DSP differently than when UAD plug­ins
are used within a DAW. To maintain the lowest possible input latency, UAD plug­ins used on a single Console input are
"chained" and must be processed within a single DSP chip. Therefore, it is possible to get a DSP/PGM/MEM limit exceeded
message even though the UAD gauges may indicate there is plenty of DSP/PGM/MEM available.
Session, plug­in, and I/O preset files saved within Console will not be saved if the "/" (forward slash), "\" (back slash), or "?"
(question mark) characters are in the filename. Avoid these and other special characters when saving Console presets of any
type.
Sample Rate Changes
http://www.uaudio.com/support/apollo­twin­support#quickstart
Apollo Twin Support Page
6/8