A2Dp/Avrcp Commands; Read A2Dp State; Establish A2Dp Connection; Release A2Dp Connection - Feasycom FSC-Blueware User Manual

2.3. A2DP/AVRCP Commands

2.3.1. Read A2DP State

Format: AT+A2DPSTAT
Response: +A2DPSTAT=Param
Param:(0~5)
(0) Unsupported
(1) Standby
(2) Connecting
(3) Connected
(4) Paused
(5) Streaming

2.3.2. Establish A2DP Connection

Format: AT+A2DPCONN{=Param}
Param: MAC address of target device (12 Bytes ASCII)
Description: Module will reconnect to last A2DP device if no parameter exist
Example: Connect to last A2DP device
<< AT+A2DPCONN
>> OK
Example2: Connect to specific A2DP device with MAC address
<< AT+A2DPCONN=1C5CF226D773
>> OK

2.3.3. Release A2DP Connection

Format: AT+A2DPDISC
Description: Release current A2DP connection with remote device
19