Resetting The Time; Changing The View - REINER SCT Authenticator Quick Manual

6 Quick Guide REINER SCT Authenticator
6 /

Resetting the time

If the TOTP codes entered in your application
are no longer accepted after a time, the internal
clock of the REINER SCT Authenticator may
have to be resynchronised.
How to reset the clock:
1. Call the following address in your Internet
browser: www.reiner-sct.com/sync
2. Switch on the REINER SCT Authenticator
with the OK key
3. Press the TAN or -key
4. Select Time ( -Taste)
5. Select Set
6. www.reiner-sct.com/sync is displayed,
press the OK key
7. The camera switches on
8. Now take a photo of the QR Code displayed
on www.reiner-sct.com/sync
9. The time is synchronised automatically
7 / Selecting other time zones
Do you want to set the time to your time
zone? Then proceed as follows:
1. Call the following address in your Internet
browser: www.reiner-sct.com/timezone
and select the desired time zone
2. Switch on the REINER SCT Authenticator with
the OK key
3. Press the TAN or -key
4. Select Time ( -Taste)
5. Select Time zone
6. www.reiner-sct.com/timezone is displayed,
press the OK key
7. The camera switches on
8. Now take a photo of the QR Code displayed on
www.reiner-sct.com/timezone
9. The time zone will be saved the next time you
switch on
8 / Deleting the account
Attention: Before deleting an account in the
REINER SCT Authenticator, make absolutely
sure that the deletion has no negative effect
on your access to the respective account or
that you can still access your account by other
methods!
Deleted accounts cannot be restored in the
REINER SCT Authenticator but they can be
recreated.
How to delete an account in the REINER SCT
Authenticator:
1. Switch on the REINER SCT Authenticator
with the OK key
2. Press the TAN or -key
3. Select Accounts ( -key, OK key)
4. Select Delete ( -key, OK key)
5. Select the account to be deleted
( -key, OK key)
6. Confirm deletion with the OK key
7. The account was deleted
Quick Guide REINER SCT Authenticator
9 /

Changing the view

The green-red time bar in the display shows for
how long the TOTP code is valid. A new code is
generated when the time bar expires.
Under the View menu item you can select:
Comfort: The time bar always starts at 100%.
This usually corresponds to 30 seconds. This
always gives you enough time to type the code.
Classic: The time bar always starts at the
absolute time. This means that the validity of
the first displayed TOTP code may have different
times. To have enough time to type the code,
you may have to wait for the second code to be
displayed.
7