REINER SCT Authenticator Quick Manual page 2

2 Quick Guide REINER SCT Authenticator
REINER SCT Authenticator
The REINER SCT Authenticator is a hardware
device for secure two-factor authentication
(2FA) by means of a time-based one-time pass-
word (TOTP code). The REINER SCT Authenti-
cator detects the authentication data displayed
by your account in the form of a QR Code in a
split second by means of its built-in camera and
assigns these to an account in the REINER SCT
Authenticator. It generates a new TOTP code
every 30 seconds for secure login to an account.
IMPORTANT NOTE:
Please read the full instructions before
using the REINER SCT Authenticators ::
reiner-sct.com/manual.
1 / The most important keys
Switch on: Press the OK key
Switch off & back: Press the C key
Menu: TAN key or -key
Selection: / -key
Menu
Switch on
OK
TAN C
Switch off
Menu
´ ^
^
Quick Guide REINER SCT Authenticator
2 / Creating new accounts
Not yet created an account? This is how you
create a new account for the first time
1. Switch on the REINER SCT Authenticator
with the OK key
2. Press the OK key again; the camera switches
on
3. Now take a photo of the QR Code of your
application
4. The TOTP authentication account is created
automatically and displayed
Creating other accounts
1. Switch on the REINER SCT Authenticator
with the OK key
2. Press the -key
3. Select Accounts ( -key)
4. Select Scan; the camera switches on
5. Now take a photo of the QR Code of your
application
6. The new TOTP authentication account is
created automatically and displayed
3