Removing A Disc (Slot-Type Drive); Inserting An Optical Disc (Tray-Type Drive) - Toshiba U500-ST5307 User Manual

Removing a disc (slot-type drive)

NOTE
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then place the
disc in its protective cover.

Inserting an optical disc (tray-type drive)

(Available on certain models)
To insert an optical disc into the drive:
1 Make sure the computer is turned on.
The drive will not open if the computer's power is off.
2 Make sure the drive's in-use indicator light is off.
3 Press the drive's eject button.
The disc tray slides partially out of the drive.
4 Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5 Hold the disc by its edges and check that it is free of dust.
If the disc is dusty, clean it as described in
discs" on page
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
The computer must be powered on to eject a disc.
115.
Learning the Basics
Using the optical drive
"Caring for optical
111