Removing A Disc (Slot-Type Drive) - Toshiba A500-ST5605 User Manual

106
Learning the Basics
Using the optical drive
If the disc is dusty, clean it as described in
discs" on page
2 With the label facing up, carefully place the disc partially into
the slot until the disc stops or the drive starts pulling the disc in.
(Sample Illustration) Positioning the disc in the drive

Removing a disc (slot-type drive)

NOTE
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then place the
disc in its protective cover.
Handle DVDs and CDs carefully, making contact only with the center
hole and edge. Do not touch the surface of the disc. Do not stack
discs. If you incorrectly handle the discs, you could lose data.
110.
Use only standard (12 cm) CD or DVD Discs. Any other size or shape
disc cannot be removed from this slot and may damage the system.
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disk or
the drive.
The computer must be powered on to eject a disc.
"Caring for optical