180
Toshiba Utilities
Fingerprint Authentication Utility
Deleting a registration
Sometimes a Web page may change or you may no longer use
it and want to remove it.
To delete an existing registration:
1
Click the Settings topic in the Control Center.
2
Click User Settings. Verify your fingerprint.
3
Select Registrations.
4
Select a registration.
5
Click Delete.
Care and maintenance of your fingerprint reader
Follow these guidelines to avoid damage to the sensor and
finger recognition problems.
❖
Do not touch the sensor if you have built-up static
electricity. Before you touch the sensor, always touch a
metal surface first to remove static electricity from your
fingers.
❖
Do not touch the sensor with anything other than your
fingers.
❖
Do not use force when swiping the sensor with your
finger.
❖
Do not touch the sensor when your fingers are wet or
dirty. Minute particles on a soiled finger can scratch the
sensor.
Observe the following before you swipe your finger on the
sensor,
❖
Wash and dry your hands thoroughly.
❖
Remove static electricity from your fingers by touching
any metal surface. Static electricity is a common cause of
sensor failures, especially when the climate is dry.