Table of Contents
Advertisement
66
Getting Started
Using external display devices
Before connecting a television, video projector, monitor or
other display device, configure your computer for the type of
device you are connecting. To do this, refer to the
documentation for your operating system and devices.
Connecting the display device
If you are connecting a television or other video display
device to the computer's video-out port, first refer to
"Selecting video cables" on page 66
choosing a video cable, then refer to
video-out port'
If you are connecting an SVGA monitor, skip to
an external monitor or projector" on page
Selecting video cables
To connect a device to the S-video port, you'll need to
purchase a cable. For the best video quality, always use a
properly shielded cable.
Using a poor-quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the video-out port
NOTE
below.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Video cables are not included with your computer. To connect
a device to the video-out port, you will need to purchase an S-
video cable.
below for guidelines on
'Connecting to the
"Connecting
67.
Advertisement
Table of Contents
