Table of Contents
Advertisement
82
Connecting Other External Devices
Inserting and removing PC Cards
Removing a PC Card
1
If the PC Card slots are locked, unlock them by turning the
computer over, locating the PC Card lock and sliding it into
the unlocked position
2
Locate the PC Card ejection button that corresponds to the
slot in which your PC Card is installed.
The top tab releases a card in the upper slot. The bottom tab
releases a card in the lower slot.
3
Press the PC Card eject button once to extend it, and push it in
to remove the PC Card.
Press the PC card ejection button once to extend it
The PC Card ejects slightly from the slot.
4
Grasp the edges of the PC Card and slide it out of the slot.
Setting up a PC Card for your computer
Some PC Cards are ready to use as soon as you install them.
Others, such as hard disk cards, network cards and SCSI adapters,
may need to be set up to work with your computer. To set up your
PC Card, refer to the documentation that came with the card or
refer to your operating system manual or online help.
Advertisement
Table of Contents
