Table of Contents
Advertisement
152
Expansion Options
Using a mouse
Connecting a serial mouse
To connect a serial mouse, connect the mouse cable to the serial
port at the back of the computer. Once connected, the mouse is
ready to use.
Refer to your mouse documentation for configuration information.
Connecting a USB mouse
To connect a USB mouse, connect the mouse cable to the USB
port on the computer. Once connected, the mouse is ready to use.
Connecting a PS/2 mouse
If you are connecting a mouse after you have started using the
computer, begin at step 1. Otherwise proceed to step 2.
1
Click Start, Turn Off Computer, then select Turn Off.
The operating system shuts off the computer.
2
Attach the PS/2 mouse cable to the PS/2 port on the computer.
3
Refer to your mouse documentation for configuration
information.
To use both the PS/2 mouse and the AccuPoint II, set this up when
you have loaded the operating system.
Make sure the computer is off before you attach the
mouse. Connecting a PS/2 mouse with the computer's
power on can damage the mouse, the computer, or both.
HINT: Using an optional Y-cable allows you to connect a
PS/2 mouse and a PS/2 keyboard to the PS/2 port
simultaneously.
Advertisement
Table of Contents
