Maintenance; Greasing The Power Rake; Checking The Hydraulic Lines - Toro TXL 2000 Operator's Manual

Maintenance

Determine the left and right sides of the machine from
the normal operating position.

Greasing the Power Rake

Service Interval: Before each use or daily
Grease Type: General-purpose grease
1. Park the machine on a level surface, disengage
the auxiliary hydraulics, engage the parking
brake, and lower the loader arms.
2. Shut off the engine and remove the key.
3. Clean the grease fittings with a rag
4. Connect a grease gun to the fitting.
5. Pump grease into the fittings until grease begins
to ooze out of the bearings.
6. Grease the caster wheels and roller bearing
(Figure 10).
7. Wipe up any excess grease.
Figure 10
1. Additional fitting at this location under the machine
Checking the Hydraulic
Lines
Service Interval: Before each use or daily
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury. Fluid injected
into the skin must be surgically removed
within a few hours by a doctor familiar with
this form of injury; otherwise, gangrene may
result.
• Keep your body and hands away from
pinhole leaks or nozzles that eject
(Figure 10).
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks; never use your hands.
g271354
11