Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.
1. Tipping hazard, exceeding rated load capacity can cause
instability—read the Operator's Manual; do not exceed
maximum load capacity of 159 kg (350 lb); for TX 413
models, do not exceed maximum load capacity of 114 kg
(250 lb).
1. Warning; crushing hazard, grapple—keep bystanders a
safe distance from the machine.
63–3510
93-7309
Product Overview
decal114-1280
1. Upper jaw
2. Tooth
Specifications
Note: Specifications and design are subject to change
decal114-1281
without notice.
Width
Length
Height
Weight
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
5
Figure 2
3. Lower jaw
87.6 cm (35.5 inches)
46 cm (18 inches)
76 cm (30 inches)
120 kg (265 lb)
g030833