Controlling Using The Glp Streamer Application; Saving A Custom Preset; Setting Up Remote Control; Controlling Remotely - German Light Product Streamer User Manual

Controlling using the GLP Streamer application

1. Connect your Streamer to your PC or Mac and start the GLP Streamer application.
2. Click on ADJUST LIGHTS. See H. Move the sliders, then click on LICHT! to activate.

Saving a custom preset

Presets 1 to 4 are fixed, but you can save your own custom settings to any preset from 5
to 8. To save a preset:
1. Connect your Streamer to your PC or Mac and start the GLP Streamer application.
2. Click on ADJUST LIGHTS. See H.
3. Move the sliders to the values that you want to store.
4. Click on SAVE PRESET SNAPSHOT and select a preset from 5 to 8.
5. Click on LICHT! to activate the values and save them to that preset.

Setting up remote control

To let another person (an online meeting host, for example) control your Streamer
remotely using the GLP control cloud:
1. Connect your Streamer to your PC and start the GLP Streamer application.
2. Click on STREAMER CONTROL.
3. See I. Give the 8-digit Streamer Device ID number that you see in the STREAMER
CONTROL window to the meeting host.

Controlling remotely

To take control of a meeting attendee's Streamer remotely using the GLP control
cloud:
1. Go to the Streamer Remote control cloud website at
https://remote.streamer.rocks 
2. Ask the attendee to give you their Streamer's 8-digit ID number as
described above.
3. See J. Enter the ID number in the DEVICE ID box and click on
LICHT!
4. Use the sliders to adjust the attendee's Streamer and click on LICHT! to activate.

Creating a custom User ID number

There may be situations where you want to create a custom ID number for reasons of
security. For example, if one Streamer is going to be shared by different people you
may want to make sure that only the meeting organizer or show producer can take
control of the Streamer. For this reason, it is possible to change the last 4 digits of your
Streamer's 8-digit Device ID number.
To change the last 4 digits of the Device ID number:
1. Connect your Streamer to your laptop and start the Streamer desktop application.
GLP® Streamer User Manual 11