Toshiba A60-S156 User Manual page 215

To connect to a Toshiba Wireless Projector:
1 Click the
2 Move the mouse pointer to Toshiba Wireless Projector
(DPJ), then click Connect.
Launching Quick Connect prevents you from using the
network to connect to a Toshiba Wireless Projector when the
wireless LAN Configuration is set to Ad hoc. If you are
connected to an access point, the connection is broken and re-
established later.
To review the current Toshiba Wireless Projector settings and
change them if necessary:
1 Click the
2 Move the mouse pointer to Toshiba Wireless Projector
(DPJ), then click Settings. The Quick Connect
properties dialog box appears.
3 Complete the settings. Refer to the online help if
necessary.
4 Click OK.
The default connection setting is for Ad hoc mode, therefore, if
NOTE
the setting on the Toshiba Wireless Projector is in
Infrastructure mode, it will not connect, however; you can
change the settings to Infrastructure mode to match the
settings on the projector.
ConfigFree Utilities
icon in the system tray.
icon in the system tray.
215