Bigben RR140I DAB Operating Instructions Manual page 20

A. Full Scan, B. Manual Tune, C. DRC, D. Prune, E. System,
• Press Enter (6) to enter the function
• Press MENU to confirm & exit the above settings.
A. Full Scan
• In DAB mode, press MENU,
minutes. The screen displays the digits and station numbers. Once completed, the unit will store a
maximum of 20 DAB preset stations.
• Short press MEM,
B. Manual Tune - Storing a DAB Station Preset
• Press MENU,
• Press to move the frequency to the desired station
• Long press MEM for 2 seconds to enter the storing mode
• Press to select the station number to store. e.g. ' 01, 02... 20'.
• Press Enter to store the station.
• Press MENU to confirm & exit the above settings.
• Short press MEM,
C. Dynamic Range Control (DRC)
In DAB mode, press MENU &
You can use this dynamic range control signal to expand or compress the dynamic range (the difference
between the loudest and quietest sounds) of the audio signal.
It will be more suited to your listening conditions and your own personal listening requirements. For
example, in a noisy environment, where quiet sounds might be swamped, setting the compression to
maximum will 'boost' the quiet sounds, whilst keeping the loudest sounds at their original level.
Further Press
DRC off: No compression. This is the default setting.
DRC low: Medium compression.
DRC high: Maximum compression.
Press MENU to confirm & exit the above settings.
D. Prune
To trim DAB stations, you can remove any unreceived stations from the DAB station list. Press the
MENU, press Enter to choose the Prune function. Select the station to be deleted. The screen will
display Yes or No. Press
unreceived station will be removed from the list and replaced by a new station.
Press MENU to confirm the above settings & exit the function.
E. System (for both DAB/FM Radio/Aux in Function)
In DAB mode, press MENU &
Press to select
1. Time (to set Time/Date) 2. Language 3. Factory Reset 4. SW version
Press Enter (6) to start the function.
1. Time
Use to select the sub-functions & press Enter (6) to confirm.
1.1 Set Time / Date
• Auto update
• Set 12/24 hour
• Set date format
1.2 Press MENU to confirm the above settings & exit the sub-functions.
1.3 Press Enter (6) to go back the Time/Date setting again.
Use to set the Hour and Minutes and press Enter (6) to confirm
to Full Scan and Enter (6). It will search for radio stations for 3
& Enter to select the desired station to play
to Manual Tune and Enter to start the tuning
& Enter to select the desired station to play.
to DRC & Enter (6) to start the function.
to select one of the 3 following compression levels.
to select & Enter to confirm the station to be deleted. The inactive or
to System & Enter (6) to start the function.
Update from DAB/Any/FM/No update
MM–DD–YYYY or DD-MM-YYYY
- EN 7 -