D-Link DMC-920R Quick Installation Manual page 3

C
ONNECTING TO
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage
of 5Vdc/1Amp to the DC-Jack on the converter, and then attach the
plug into a standard AC outlet with a voltage range from 100 to
260 Vac.
S S
LIDING
There is a sliding switch for duplex mode setting for fiber port. Refer to
the table below for more details.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
P
OWER
WITCH
On
Off
On
Off
On
Off
On
Off
On
Off
On
Off
Fiber Half Duplex
Fiber Full Duplex
TX Forced Mode
TX Auto-Negotiation
TX 10M
TX 100M
TX Half Duplex
TX Full Duplex
LLR Enable (RFD Disable)
LLR Disable (RFD Enable)
LLCF Enable
LLCF Disable
3