Table of Contents
Advertisement
56
Getting Started
Using the computer for the first time
left one and corresponds to the left mouse button. To double-
click, press the primary button twice in rapid succession.
The function of the secondary button depends on the program
you are using. It usually corresponds to the right mouse
button. Check your program's documentation to find whether
it uses the secondary mouse button.
Disabling or enabling the TouchPad
The TouchPad is enabled by default. To change the enable/
disable TouchPad setting:
1
Click Start, Control Panel.
The Control Panel window appears.
2
Click Printers and Other Hardware.
3
Click Mouse Properties.
The Mouse Properties window appears.
4
Click the TouchPAD ON/OFF tab.
The TouchPAD ON/OFF tab view window appears.
5
Select Disable or Enable, whichever is appropriate.
6
Click Apply.
7
Click OK.
The Mouse Properties window closes.
8
Close the Printers and Other Hardware window.
9
Close the Control Panel window.
You can also use a hot key to disable or enable the
TouchPad. For more information, refer to
enabling the TouchPad" on page
"Disabling or
229.
Advertisement
Table of Contents
