Directing The Display Output When You Turn On The Computer; Adjusting The Quality Of The External Display - Toshiba 1955-S805 User Manual

66
Getting Started
Using external display devices

Directing the display output when you turn on the computer

Once you've connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 While holding down
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
❖
2 Release the
NOTE: You can also change these settings using the Display
Properties box in the Control Panel.

Adjusting the quality of the external display

To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
documentation supplied with the device for additional
configuration steps.
Built-in display panel only
Built-in display panel and external monitor
simultaneously
External monitor only
Built-in display panel and external video device
simultaneously
Other external video device only
key.
Fn
, press repeatedly until the
Fn F5
+ ).
Fn F5