Related Manuals for IRONRIDGE XRL Light Rail
Summary of Contents for IRONRIDGE XRL Light Rail
- Page 1 Installation Manual Solar Mounting Made Simple Roof Mounting System Light Rail (XRL) 2013 Edition v1.3 A complete Manual for the installation of IronRidge’s Light Rail system.
-
Page 2: Table Of Contents
Table of Contents Installation Manual Solar Mounting Made Simple This Installation Manual was created to help with the assembly of the IronRidge Light Rail Mounting System. Light Rail Introduction Installer Responsibility Customer Support Tools Required For Assembly Torque Values For Dry Bolts... -
Page 3: Introduction
Customer Support IronRidge makes every effort to ensure your mounting kit is easy to install. If you need assistance at any point with your installation or have suggestions on how we can improve your experience, call IronRidge customer support: (707) 459-9523 Tools Required For Assembly Wrenches are required to assemble the IronRidge Light Rail System. -
Page 4: Module Clamp Table
National Electrical Code (NEC®), National Electrical Installation Standards (NEIS™), UL Standards, and OSHA Regulations. Note: For installations that utilize WEEBs, WEEB Lugs and WEEB Bonding Jumpers, please refer to Wiley/Burndy installation manual for “IronRidge Light and Standard Series Rail” for proper installation procedures. support@ 2013 v1.3... -
Page 5: Component List
Light Rail Installation Manual Solar Mounting Made Simple Component List The IronRidge Light Rail System contains the following parts: Internal Splice L-Foot Ties the extrusion rails Attaches to the roof and is the together, extending their anchor point for the rest of the length. - Page 6 C. On this same piece of rail, slide 1/4-20” bolts into the top facing t-slot on the rail. Space the bolts out to match the panel spacing. support@ 2013 v1.3 ironridge.com (800) 227-9523 Page 4...
- Page 7 Note: For installations that utilize WEEB Bonding Jumpers, please refer to Wiley/Burndy installation manual for “IronRidge Light and Standard Series Rails” for proper installation procedures. F. Loosely mount this piece of rail onto its footings. G. By moving this second rail along...
- Page 8 A. Lay the first PV module in position on the rails. Note: For installations that utilize WEEBs, please refer to Wiley/Burndy installation manual for “IronRidge Light and Standard Series Rails” for proper installation procedures. B. Then slip the end clamp over the...
- Page 9 Note: For installations that utilize WEEBs, please refer to Wiley/Burndy installation manual for “IronRidge Light and Standard Series Rails” for proper installation procedures. G. Tighten to 120 in-lbs. (dry), 100 in-lbs. (wet).
-
Page 10: Warranty Information
Product is required with any warranty claim. Except as set forth above, IronRidge sells the Products on an “AS IS” basis, which may not be free of errors or defects, and ALL EXPRESS...
Need help?
Do you have a question about the XRL Light Rail and is the answer not in the manual?
Questions and answers