Checking Total Memory - Toshiba 1410-S105 User Manual

Installing additional memory (optional)
Removing the memory module
3 Gently pull the module out.
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
4 Complete the procedure by following steps 10 through 12
in "Installing additional memory (optional)" on page

Checking total memory

When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1 Click Start, Control Panel
2 Click Performance and Maintenance.
3 Click System.
4 The General tab view automatically appears and shows
the recognized memory.
5 If the computer does not recognize the memory
configuration, turn off the computer, remove the memory
slot cover, and make sure the memory module is seated
Getting Started
57
51.