Table of Contents
Advertisement
58
Getting Started
Using external display devices
Control buttons
When a step instructs you to click or choose an item, move the
cursor to the item, then press and release the primary (left-hand)
button. To double-click, press the primary button twice in rapid
succession. The primary button usually corresponds to the left
mouse button.
The function of the secondary (right-hand) button depends on the
program you are using. It usually corresponds to the right mouse
button ("right-clicking"). Check your program's documentation to
determine whether it uses the right mouse button.
Disabling or enabling the TouchPad
The TouchPad
TouchPad setting, press
TouchPad. For more information, see
TouchPad" on page
Using external display devices
Your computer comes with a built-in LCD display, but you can also
connect the following types of external display devices to the video
ports described below:
An HDMI-compatible television or VCR/DVD player via the
HDMI Out port
A standard television, projector, or VCR/DVD player via the S-
video Out port
An external monitor or projector via the RGB (monitor) Out
port
(Sample Illustration) Back of system
You cannot connect both the S-video Out port and the HDMI Out
port to the same device at the same time.
The system display default is set at the factory to S-video Out.
™
is enabled by default. To change the enable/disable
Fn
+
F9
221.
S-video Out port
RGB (Monitor Out) port
™
. This hot key enables/disables the
"Disabling or enabling the
HDMI Out port
Advertisement
Table of Contents
