62
Getting Started
Installing additional memory (optional)
You need a standard Phillips no.1 screwdriver for this
procedure.
The computer has two memory module slots—Slot A and
Slot B. You can install one or two memory modules.
If the computer is on, begin at step 1; otherwise, skip to
step 3.
1
If the computer is on, click Start, then click Turn off
computer. See
page 108
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer, including the AC adapter cord/cable.
4
Close the display panel and turn the computer upside
down to locate the memory module slot cover.
Sample locating the memory module slot cover
To avoid damaging the computer's screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
"Using the Turn off command" on
for more information.
Memory module
slot cover