Table of Contents
Advertisement
260
Using the RAID-0 or RAID-1 Utility
Using RAID
Sample New HDD detected window
9
To create a RAID-1 array, click Enable RAID.
The Confirm disk mirroring window appears.
Sample Confirm disk mirroring window
10
Click OK.
The computer begins creating the array by copying data from
the primary internal hard disk to the secondary internal hard
disk.
NOTE
NOTE
RAID-1 configuration takes approximately one hour to
complete.
If the operating system is shut down before the RAID-1
configuration is complete, the RAID-1 configuration will
automatically resume when the computer is restarted.
Once the computer has been restarted you can continue to
work while the configuration resumes.
- Quick Links:
- Setting up Your Computer
Hide quick links:
Advertisement
Table of Contents
