Installing additional memory (optional)
Sample removing the memory module
4
Replace the memory module slot cover and fasten the
screw.
5
Turn the computer over and restart it.
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1
Click Start, then click Control Panel.
2
Click Performance and Maintenance.
3
Click System.
4
The General tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step
(optional)" on page
10
of
"Installing additional memory
62.
Getting Started
67