Directing The Display Output When You Turn On The Computer - Toshiba F40-ST4101 User Manual

4 Click Apply, then click OK to close the Display Settings
window.
The screen is now displayed correctly on your TV.
For more information, see
turn on the computer" on page
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen or to display anything on your
computer screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the back of the computer.
2 Connect the device's power cable to a live electrical outlet.
3 Turn on the external device.
Your computer will automatically detect the external display
device and activate a screen with display options.
4 Select the settings you desire and click Apply.
5 Click OK.

Directing the display output when you turn on the computer

Once you connect an external display device, you can choose to use
the internal display only, the external device only, or both
simultaneously.
NOTE
The quickest way to change the display output settings is to use the
display hot key (
1 While holding down
each press, until the setting you want takes effect.
This hot key cycles through the settings in the following order:
Using external display devices
Some modes are only available with the appropriate device attached
and turned on.
):
Fn + F5
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Built-in display and TV (or other external video device)
simultaneously
TV (or other external video device) only
Getting Started
"Directing the display output when you
63.
Fn , press F5 repeatedly, pausing between
63