Vtx A12W Specifications - JBL VTX Series User Manual

14.2 VTX A12W SPECIFICA TIONS
SYSTEM
Frequency Range (-10 dB):
Coverage Pattern (-6 dB)
Horizontal:
Vertical:
System Input Power Rating
LF:
MF:
HF:
Maximum Peak Output²:
System Amplification:
Required Amplifier Channels:
Number of Cabinets per Circuit:
System Impedance:
TRANSDUCERS
Low Frequency :
Mid Frequency :
High Frequency :
ENCLOSURE
Construction :
IP Rating
Suspension :
Inter-enclosure Angle (deg) :
Grill :
Connectors
Type :
Pin Assignments :
Dimensions (H x W x D) :
Net Weight :
Footnotes:
1: IEC Standard: IEC shaped noise with 6 dB crest factor based on nominal impedance and a duration of 100 hours
2: Peak, unweighted SPL, measured under full-space conditions at 1 meter using broadband pink noise with a 12 dB crest factor and specified preset
3: Front face at 0 degree or greater down angle to allow the cabinet to drain water. Suspension components fully weather rated for indoor or covered outdoor conditions where humidity is nominally under 50% and not local
to bodies of corrosive materials. Unused speakON connectors must be sealed using silicone to protect against water and moisture
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that
philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
46 Hz - 19 kHz (Preset: VTX A12W)
120 degrees nominal (250 Hz - 18 kHz)
Varies with array size and configuration
1
2x 800W Continuous (IEC/100 hour)
400W Continuous (IEC/100 hour)
150W Continuous (IEC/100 hour)
146 dB (Preset: VTX A12W)
Crown I-Tech 9000HD
Crown I-Tech 12000HD
Crown I-Tech 4x3500HD
(4) channels (LF|LF|MF|HF)
(3) VTX A12W
LF: 2x 8 ohms | MF: 8 ohms | HF: 8 ohms
(2) JBL 2264H, 12 in diameter, dual 3 in diameter voice coil, Neodymium Differential Drive
(4) JBL 2165H, 5.5 in diameter, dual 2 in diameter voice coil, Neodymium Differential Drive
(3) JBL 2423K, 2 in diameter annular diaphragm, 2 in diameter voice coil, Neodymium compression drivers
15 mm 11-ply Finnish birch plywood, Black DuraFlex
: IP55 EN (60529)
3
High-grade steel with anti-corrosion coating, captive suspension plates, quick release pins, auto-locking mech-
anism for setting angles
0.25, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10
Powder coated 1.8 mm (14-guage), hex-perforated steel with acoustically transparent black cloth backing
(2) Neutrik speakON NL-8
® ®
Pins 1 ± (LF), Pins 2 ± (LF),
Pins 3 ± (MF), Pins 4 ± (HF)
330 mm x 1118 mm x 495 mm
13 in x 44 in x 19.5 in
60.8 kg (134 lbs)
VTX A12 | User Manual
finish, four integral recessed handles
TM
31
®
®