Sharp AQUOS LC-60LE636E Operation Manual page 19

Initial auto installation
Press a/b to select "OK", and then press ;.
7
After completing this setting, the screen
switches to the DVB-S/S2 setting screen shown
in the left column on page 16.
NOTE
• Follow the instructions on the screen for "2 satellites
on 22kHz switchbox", "2 satellites on toneburst
switchbox", "Max. 4 satellites on DiSEqC multiswitch"
and "Communal satellite system" settings.
• To set multiple satellite channels, go to "Max. 4 satellites
on DiSEqC multiswitch".
• Follow the procedure below when the supply of power
is needed for a satellite antenna:
Go to "Menu" > "Setup" > "View setting" > "Channel
settings" > "Antenna setup-DIGITAL" > "Satellite setup"
> "Change setting" > "Communal satellite system".
2 When starting the satellite search
after setting the scrambled stations:
Press c/d to select "Next" on the DVB-S/S2
setting screen shown in the left column on page
16, and then press ;.
NOTE
• When you perform the initial auto installation, "Next"
cannot be selected. Completing "Change setting"
enables you to select "Next".
Scrambled stations: No
Satellite Symbol rate 1
other
Start search Change setting
E Start search:
DVB-S/S2 channel searching.
Press c/d to select "Start search", and then
1
press ;.
The TV searches for and stores all the receivable
2
TV stations according to their settings and the
connected antenna.
• Select "Yes" to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress,
press 6.
17
E
Change setting:
Press c/d to select "Change setting", and then
1
press ;.
• The setting screen of "Scrambled stations" and
"Symbol rate" is displayed.
Scrambled stations
SAT1-Symbol rate 1
SAT1-Symbol rate 2
SAT2-Symbol rate 1
Search start
Symbol rate 2
Press a/b to select "Scrambled stations", and
2
then press ;.
• Scrambled stations: Specifies if you need to add
pay-TV services.
Press c/d to select "Yes", and then press ;.
3
Press a/b to select the symbol rate you want
4
to modify, and then press ;.
• Symbol rate: You need to set each symbol rate of
all the satellite broadcasts that the TV can receive
(eight is the maximum number of symbol rates that
can be displayed).
Press c/d to select "Search start", and then
5
press ;.
The TV searches for and stores all the receivable
6
TV stations according to their settings and the
connected antenna.
• Select "Yes" to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress,
press 6.
[No]
Yes No