Related Manuals for Sharp AQUOS LC-60LE636E
Summary of Contents for Sharp AQUOS LC-60LE636E
- Page 1 MODEL LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S OPERATION MANUAL LCD COLOUR TELEVISION...
- Page 2 CE Statement: Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (WN8522D 7-JU) is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at: http://www.sharp.de/doc/ WN8522D_7.pdf.
-
Page 3: Table Of Contents
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read Important safety precautions carefully before using this product. Contents Introduction ... 1 Dear SHARP customer ... -
Page 4: Important Safety Precautions
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. - Page 5 Introduction Caring for the front panel • Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel. •...
-
Page 6: Supplied Accessories
Introduction Supplied accessories Remote control unit ( x 1) LR03 (“AAA” size alkaline) battery ( x 2) Pages 6 and 8 Stand unit ( x 1) Page 5 Initial setup guide USB memory (printed document) (operation manual) Optional accessories The listed optional accessories are available for this LCD colour TV. Please purchase them at your nearest shop. -
Page 7: Preparation
Preparation Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged. CAUTION •... -
Page 8: Using The Remote Control Unit
Preparation Using the remote control unit Inserting the batteries Before using the TV for the first time, insert the two supplied LR03 (“AAA” size alkaline) batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new LR03 (“AAA” size alkaline) batteries. -
Page 9: Part Names And Functions
Part names and functions TV (front/side view) Illumination LED OPC sensor (Page 32) Remote control sensor (Page 6) TV (rear view) USB 3 ( WIRELESS LAN) port USB 2 (HDD) port ETHERNET (10/100) terminal Satellite antenna terminal (635 series only) The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (L/R)). -
Page 10: Remote Control Unit
Part names and functions Remote control unit >a (Standby/On) (Page 19) 2 ATV Access conventional analogue TV mode. Access digital TV mode. Access satellite mode. RADIO DTV/SAT: Switch between radio and data mode. • When only data broadcasting (no radio 3 AQUOS LINK buttons (Pages 28 and 30) 4 CONTROL (Pages 47, 48, 52 and 61) Display a panel to operate some... -
Page 11: Quick Guide
Quick guide Operation overview Follow the steps below one by one when using the TV. Some steps may not be necessary depending on your TV installation and connection. 1. Preparation - Connecting the TV Plug the standard DIN45325 plug (IEC 169-2) 75 •... - Page 12 Quick guide 3. Watch TV - Daily operation Turn on/off the TV (Page 19) • You can turn on/off the power using both the remote control and the Switch between digital, satellite and analogue broadcast (Page 19) Change channels (Page 19) •...
-
Page 13: Inserting The Ca Card Into The Ci Module
Quick guide Inserting the CA card into the CI module In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the TV. Carefully insert the CI module in the CI slot with the contact side forward. -
Page 14: Using The Menu Screen
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “Menu”. The “Menu” enables various settings and adjustments. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on LCD LCFONT screens. - Page 15 Quick guide Using Software keyboard Use the software keyboard when you need to input text. Char.Set Caps Done Cancel Cursor Left Caps Char.Set 6 Input cursor Char. Set Changes character Press c/d to move the set into the alphabet, cursor when highlighted. numbers, symbols, etc.
-
Page 16: Initial Auto Installation
Initial auto installation Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power Is the antenna cable connected? Is the AC cord plugged in? - Page 17 Initial auto installation Digital broadcast setting Press c/d to select “Terrestrial” or “Cable”, and then press ;. Terrestrial Cable Searching for terrestrial broadcasts The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna. •...
- Page 18 Initial auto installation Searching for satellite broadcasts (635 series only) Press c/d to select “Yes”, and then press ;. • If you do not perform “Satellite search” setting, select “No”, and then press ;. • The current DVB-S/S2 setting screen is displayed. Satellite System Max.
- Page 19 Initial auto installation Press a/b to select “OK”, and then press ;. After completing this setting, the screen switches to the DVB-S/S2 setting screen shown in the left column on page 16. NOTE • Follow the instructions on the screen for “2 satellites on 22kHz switchbox”, “2 satellites on toneburst switchbox”, “Max.
-
Page 20: Supplying Power To The Antenna
Initial auto installation Checking signal strength and channel strength (DVB-T/T2* /C/S* If you install a DVB-T/T2/C/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. 636 series only 635 series only Go to “Menu”... -
Page 21: Watching Tv
Watching TV Daily operation Turning on/standby the power Turning on the power Press < on the TV or >a on the remote control unit. Standby mode Press < on the TV or TV a on the remote control unit when TV is on. •... -
Page 22: Selecting A Sound Mode
Watching TV Selecting a sound mode DTV/SAT mode If multi sound modes are received, each time you press 7 the mode switches as follows. Audio (ENG) STEREO Audio (ENG) CH A CH A CH B CH AB Audio (ENG) MONO Press c/d to select L or R sound when the STEREO or DUAL MONO screen is displayed. -
Page 23: Epg
Watching TV EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule for DTV/SAT/RADIO/DATA, view detailed information about them and tune to an event currently on-air. Useful settings for using EPG View setting If you want to use the EPG for digital stations, select “Yes”. - Page 24 Watching TV Selecting a programme using EPG The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. Programme info. Search by genre Search by date Select Enter Back Exit NOTE • You can also display the EPG screen from “Menu” > “EPG” > “EPG”. Select a programme 1 Select the time span 3 Check programme...
-
Page 25: Teletext
Watching TV Timer setup using EPG You can switch to a programme at a set time. Press EPG. Press a/b/c/d to select the programme you want to set, and then press ;. Programme info. Back to EPG Next Watch Press c/d to select “Watch”, and then press •... -
Page 26: Connecting External Devices
Connecting external devices Introduction to connections The TV is equipped with the terminals as shown below. Find the cable corresponding the TV’s terminal and connect the device. Before connecting ... • Be sure to turn off the TV and any devices before making any connections. -
Page 27: Video Connections
Connecting external devices Video connections HDMI connection Example of connectable devices DVD player/recorder Blu-ray player/recorder Game console The HDMI connections permit digital video and audio transmission via a connection cable from a player/recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. - Page 28 Connecting external devices SCART connection Example of connectable devices DVD player/recorder SCART cable (commercially available) NOTE • Regarding the external output: − You can record programmes viewed on the TV with an external recording device by connecting the external output of the TV with an SCART cable (commercially available).
-
Page 29: Audio Connections
Connecting external devices VIDEO connection Example of connectable devices DVD player/recorder Game console Camcorder You can use the EXT 2 terminal when connecting to a game console, camcorder, a DVD player/recorder or other device. AV cable (commercially available) Audio connections Speaker/amplifier connection Connect an amplifier with external speakers as shown below. -
Page 30: Aquos Link
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE •... -
Page 31: Aquos Link Connection
AQUOS LINK AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD player/ AQUOS recorder that supports the HDMI CEC protocol. Connecting an AQUOS BD player/AQUOS recorder via the AQUOS AUDIO speaker system AQUOS BD player/AQUOS recorder AQUOS AUDIO speaker system ... -
Page 32: Aquos Link Setup
AQUOS LINK AQUOS LINK setup Basic operation Go to “Menu” > “Link operation” > “AQUOS LINK setup” > select the menu you want to set. AQUOS LINK control Set to “On” to enable HDMI CEC functions. Auto power on If this is activated, the one touch play function is enabled. - Page 33 AQUOS LINK Top menu/title list This section explains how to play back a title in the AQUOS BD player/AQUOS recorder. Press a/b to select “Top menu/title list”, and then press ;. • The linked recorder now powers on and the TV automatically selects the appropriate external input source.
-
Page 34: Basic Adjustment
Basic adjustment Picture settings Go to “Menu” > “Setup” > “Picture”. Menu CH list Setup :Enter :Back Picture AV mode [Off] Backlight Contrast Picture AV mode “AV mode” gives you several viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of programme watched or the type of image input from external equipment. - Page 35 Basic adjustment Picture Advanced This TV provides various advanced functions for optimising the picture quality. Go to “Menu” > “Setup” > “Picture” > “Advanced”. C.M.S.-hue This function adjusts the hue of a selected colour using a six-colour adjustment system. C.M.S.-saturation This function increases or decreases the saturation of a selected colour using a six-colour adjustment system.
-
Page 36: Audio Settings
Basic adjustment Audio settings Go to “Menu” > “Setup” > “Audio”. Menu CH list Setup :Enter :Back Audio STANDARD Auto volume [Off] Treble Bass Balance Audio Auto volume Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. -
Page 37: Power Save Settings
Basic adjustment Power save settings Go to “Menu” > “Setup” > “ECO”. Menu CH list Setup :Enter :Back ECO picture control [On] Energy save [Off] No signal off [Disable] No operation off [Disable] ECO picture control This function automatically detects the image source and decreases the power consumption while keeping the brightness of the image unchanged. -
Page 38: View Settings
Basic adjustment View settings Go to “Menu” > “Setup” > “View setting” Menu CH list Setup :Enter :Back View setting Auto installation Channel settings Quick start Individual setting View setting Auto installation The TV automatically detects and stores all available services in your area. - Page 39 Basic adjustment Buttons for “Manual adjust” operation Press R button. Lock When the service is locked, you must enter your PIN whenever you tune to the service. Press G button. CH skip Services with a ✔ mark are passed over when pressing :r/s on the TV or remote control unit.
- Page 40 Basic adjustment Analogue setting You can reconfigure the analogue TV channels settings automatically or manually. Additional search Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed. • Start searching channels after selecting the colour system and sound system.
-
Page 41: Tv Start-Up Time Setting
Basic adjustment TV start-up time setting View setting Quick start You can reduce the TV’s start-up time after turning on the power with the remote control unit. Go to “Menu” > “Setup” > “View setting” > “Quick start”. Item The TV quickly starts up from standby. 14 W or more of power consumption is required during standby. -
Page 42: Individual Setting - Language
Basic adjustment Individual setting - Language View setting Digital audio language Set up to three preferred multi audio languages to display if the audio languages are available. Go to “Menu” > “Setup” > “View setting” > “Individual setting” > “Digital audio language”. Switching the multi audio languages Each time you press 7 on the remote control unit, the audio language switches. -
Page 43: Useful Viewing Functions
Useful viewing functions Optional features settings Go to “Menu” > “Setup” > “Option”. Menu CH list Setup :Enter :Back Option Option for view AQUOS LINK setup Terminal setting EPG setup Selecting the picture size manually Option Wide mode You can select the picture size. Selectable picture size varies with the type of signal received. -
Page 44: Audio Select
Useful viewing functions Selecting the WSS picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Panorama”. Go to “Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal range keeping 4:3 or 16:9 Normal aspect ratio. - Page 45 Useful viewing functions Input source settings Option Input select For setting the signal type of external equipment. Press b to select the input source for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ;. Go to “Menu” > “Setup” > “Option” > “Terminal setting”...
- Page 46 Useful viewing functions Screen effect settings Option Channel selecting effect This function shows a screen effect when choosing or changing channels. Go to “Menu” > “Setup” > “Option” > “Screen effect” > “Channel selecting effect”. Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel.
-
Page 47: Additional Features
Useful viewing functions Additional features Option Illumination This function makes the LED on the front of TV illuminated in several ways. Go to “Menu” > “Setup” > “Option” > “Illumination”. Item The LED is not illuminated. The LED is illuminated while the TV is Standby in standby mode. -
Page 48: Other Useful Features
Other useful features Using a USB device The TV provides you some functions using a USB device. You can select which function to use after inserting a USB device in the USB port, and the TV starts the settings for each function. USB usage •... -
Page 49: Time Shift
Other useful features Time shift This function enables you to pause the digital TV or satellite programme you are watching and start watching it again from the paused scene. Press READY. • The TV starts temporary recording of the real time broadcast in the background. - Page 50 Other useful features Examples of time shift usage When you move away from the TV for a while (press READY when you move away from the TV) Without time shift Away You miss the scene while you are away. With time shift Away You can watch the missed scene when you come back.
- Page 51 Other useful features Option Device registration You need to perform this function to register the USB storage device for the time shift. Go to “Menu” > “Setup” > “Option” >“Time shift setting” > “Device registration”. • Refer to For time shift (Page 46) for registering a USB storage device.
-
Page 52: Usb Media/Home Network
Other useful features USB media/Home network USB media/Home network In both modes, you can enjoy viewing photos, listening to music and watching videos from external USB devices (USB Memory, USB card reader (Mass Storage Class), USB HDD) or Home network server. NOTE •... - Page 53 Other useful features Viewing enlarged photos Buttons for enlarged photo display operation (When using USB media mode) Buttons Description Go to the previous/next photo in the c/d (Cursor) same directory. Return to the thumbnail selection screen. Rotate the photo by 90 degrees to the R button left.
-
Page 54: Music Mode
Other useful features Music mode * This screen image is for the USB media mode. It may be slightly different in the Home network mode. Buttons for music mode (When using USB media mode) Buttons Description When selecting a music file: Play music. -
Page 55: Usb Device Compatibility
Other useful features View setting DivX® setup This is the function to confirm your registration code. You need to register the code at www.divx.com. Go to “Menu” > “Setup” > “View setting” > “DivX® setup”. DivX® VOD registration You can find your registration code on this menu. You need to register the TV at www.divx.com before playing the DivX content. -
Page 56: Connecting A Pc
Connecting a PC Connecting a PC HDMI connection HDMI 1, 2, 3 or 4 terminal HDMI-certified cable (commercially available) HDMI 2 terminal* ø 3.5 mm stereo DVI/HDMI cable minijack cable (commercially (commercially available) available) * When using the HDMI 2 terminal, you must select the proper item in the “Audio select”... - Page 57 Connecting a PC Adjusting the PC image automatically Option Auto sync. This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc.
- Page 58 Connecting a PC PC compatibility chart Horizontal Vertical Analogue Resolution frequency frequency 640 x 480 31.5 kHz 60 Hz SVGA 800 x 600 37.9 kHz 60 Hz 1,024 x 768 48.4 kHz 60 Hz WXGA 1,360 x 768 47.7 kHz 60 Hz 1,280 x SXGA...
-
Page 59: Pc Control Of The Tv
Connecting a PC PC control of the TV • When a programme is set, the TV can be controlled from the PC using RS-232C or IP. The input signal (PC/ video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. - Page 60 Connecting a PC Command list CONTROL COMMAND PARAMETER CONTROL CONTENTS ITEM POWER P O W R 0 _ POWER OFF SETTING (STANDBY) INPUT T G D _ _ INPUT SWITCHING SELECTION A (TOGGLE) T V D _ _ TV (CHANNEL FIXED) D T V _ _ DTV (CHANNEL FIXED)
-
Page 61: Network Setup
Network setup Connecting to the network To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless. - Page 62 • If you want to change the IP settings manually, go to “Menu” > “Setup” > “View setting” > “Network setup” > “IP setup” and follow the on-screen instructions and the operation manual of the router. • See page 69 to check the supplied SHARP wireless LAN adapter specifications.
-
Page 63: Net Tv
TV screen and may not be displayed correctly. • You cannot download and save files nor install plug-ins. DISCLAIMERS • SHARP corporation bears no responsibility regarding the content and quality of the content provided by the content serve provider. Operations in Net TV... - Page 64 Net TV Reload Refreshes the page you are browsing. If an error occurs while loading the page, execute this function and reload it. Select “Reload”, and then press ;. Zoom Adjusts the display size of the page you are browsing. Zoom [100] 20 : Adjust...
-
Page 65: Disclaimers And Software Licences For Net Tv
Net TV Disclaimers and software licences for Net TV DISCLAIMERS • • • • • • This product includes the Opera™ browser. • This product contains fonts provided by Monotype Imaging Inc. • Monotype® is a trademark of Monotype Imaging Inc. registered in the United States Patent and Trademark Office and may be registered in certain jurisdictions. -
Page 66: Appendix
Appendix Troubleshooting Problem Possible solution • No power. • Is the AC cord disconnected? • Check if you pressed < on the TV. • The TV cannot be • External influences such as lightning, static electricity, etc., operated. may cause improper operation. In this case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes. -
Page 67: Updating Your Tv Via Dvb-T/T2
Appendix Updating your TV via DVB-T/T2* Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. * 636 series only View setting Download setup Go to “Menu”... -
Page 68: Information On The Software Licence For This Product
“Software licence”. Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Updating your TV via USB/network Information Software update This function allows you to update to the latest software via a USB device or network. -
Page 69: Trade Marks
• LC_ LCFONT+ and LC logo mark are registered trademarks of SHARP Corporation. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen pages. -
Page 70: Specifications
Standby power consumption applies when the TV is set to not receive EPG data. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. -
Page 71: Specifications (Wireless Lan Usb Adapter)
• Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports WEP64, WEP128, TKIP and AES encryptions. • Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. -
Page 72: Environmental Specifications
• The power consumption of On-Mode varies depending on the images the TV displays. Mounting the TV on a wall • This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4). The use of other wall mount brackets may result in an unstable installation and 101 W may cause serious injuries. - Page 73 Appendix Rating table for child lock Broadcasted rating User-adjusted rating 10 11 12 13 14 15 16 17 18 Universal — — — — — — ✔ viewing Parental — — ✔ ✔ ✔ ✔ ✔ approval pref. ✔ ✔ ✔...
-
Page 74: Dimensional Drawings
Appendix Dimensional drawings LC-60LE635E LC-60LE635RU LC-60LE636E LC-60LE636S (1383) (1329.12) (1329,12) (536) (400) (215) Active area Thinnest part NOTE • Dimensions do not include protrusions such as screws and some parts. (26.4) (26,4) (72.0) (72,0) (149) (333) -
Page 75: Eu Energy Label For Televisions
The retailer or online shop where you purchased your television from would have displayed the label and its corresponding rating. If in doubt please consult them. In addition to saving energy many Sharp LCD televisions also carry the EU Ecolabel, a voluntary environmental label that is awarded to goods which meet the environmental requirements of the EU ecolabelling scheme (for details see http://ec.europa.eu/environment/ecolabel/). - Page 76 SHARPe SHARP ELECTRONICS (Europe) GmbH SonninstraBe 3, D-20097 Hamburg SHARP CORPORATION http://www.sharp-eu.com 11 P09-PL-NG...