Sharp AQUOS LC-60LE636E Operation Manual page 17

Initial auto installation
Digital broadcast setting
Press c/d to select "Terrestrial" or "Cable",
and then press ;.
Terrestrial Cable
E
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
NOTE
• A region or service selection screen may display
depending on the country settings or cable providers
selections. Follow the screen prompts to make the
selections.
635 series only
After searching for terrestrial channels, the screen
switches to the "Satellite search" setting (Page 16).
E
Searching for cable broadcasts
To change each item to the appropriate settings:
Press a/b to select
1
Scrambled stations
the menu, and then
Search method
press ;.
Start frequency
Press a/b/c/d or
2
Network ID
0_9 to select or input
the appropriate item/
Symbol rate 1
value, and then press
Symbol rate 2
;.
QAM modulation 1
QAM modulation 2
Reset
Search start
Press a/b to select "Search start", and then
3
press ;.
Press c/d to select "Yes" to start searching
4
cable broadcasts, and then press ;.
The TV searches for, sorts and stores all the
5
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
635 series only
After searching for cable channels, the screen
switches to the "Satellite search" setting (Page 16).
Menu Description
Specifies if you
Scrambled
need to add pay-
stations
TV services.
Specifies how
you search for
Search method
channels.*
Start frequency
Specifies the
Network ID
network.*
Input the value
Symbol rate 1/
received for
Symbol rate 2* 1
CATV.* 4
QAM
[Yes]
modulation 1
[Channel]
QAM
modulation 2
[None]
Set up "Symbol rate 2" if the cable provider uses
I
several symbol rates.
J Details about the "Search method" items are as
follows:
_Channel: Extracts all information from a channel
(quick, but needs corresponding TV stations).
_Frequency: Checks every frequency in range (slow).
_Quick: All services are searched by one frequency.
This menu works only when your cable provider
provides the frequency and the network ID (e.g.,
Homing channel). When "Quick" is selected,
"Scrambled stations" is automatically set to "No", and
"None" for the "Network ID" menu cannot be selected.
K Set this to register only the specified network ID
without registering any special services.
The symbol rates are specified by the cable provider.
L
Analogue broadcast setting
Selectable items
The TV searches for, sorts and stores all the
Yes, No
receivable TV stations according to their settings
and the connected antenna.
Channel,
• To abort the initial auto installation in progress,
Frequency, Quick
2
From 47.0_858.0
MHz
635 series only
None, 0_65535
3 After searching for analogue channels, the screen
switches to the "Satellite search" setting (Page 16).
1000_9000
16, 32, 64, 128,
256
None, 16, 32, 64,
128, 256
15
press 6.