Placing Originals; Using The Automatic Document Feeder - Sharp MX-B382 Start Manual

PLACING ORIGINALS

The automatic document feeder can be used to automatically scan many originals at
once. This saves you the trouble of manually feeding each original.
For originals that cannot be scanned using the automatic document feeder, such as a
book or a document with notes attached, use the document glass.

Using the automatic document feeder

When using the automatic document feeder, place the originals in the document feeder
tray.
Make sure an original has not been placed on the document glass.
When using the MX-B382
Set the original in the upper
tray.
Adjust the original guides
to the width of the originals.
When using the MX-B382SC
Set the original in the lower
tray.
Adjust the original guides
to the width of the originals.
18
Place the originals face up with the edges
aligned evenly.
The indicator line indicates approximately
how many originals can be placed. The placed
originals must not be higher than this line.
Place the originals face up with the edges
aligned evenly.
The indicator line indicates approximately
how many originals can be placed. The placed
originals must not be higher than this line.