Vetter ManuTel G2 Series Operating Instructions Manual page 33

Spare parts VETTER Industrie GmbH, as the manufacturer, reserves the right to make changes at
any time as part of continuous product improvement. For this reason, it is important to
state the type and article number with every order for spare parts (
on page 12).
Fig. 17: ManuTel
1 Fork arm locking device
2 Locking pin
3 Basic fork arm
4 Retainer
5 Locking sleeve
6 Slip-on coupling for basic fork arm
7 Pull-out protection
8 Type plate
V1.09/2019
Ask the manufacturer or service partner for spare parts and state the
article number on the type plate when you do so.
®
G2 spare parts
®
ManuTel telescopic fork arm Type G2
Maintenance
Repairs and spare parts
Ä "Type plate"
33