Assembly And Disassembly; Assembly - Vetter ManuTel G2 Series Operating Instructions Manual

4

Assembly and disassembly

4.1

Assembly

Checking
compatibility
1.
2.
3.
Assembly Personnel:
Protective equipment:
Special tool:
Carry out assembly of the ManuTel
1.
2.
3.
V1.09/2019
NOTICE!
Carry out a compatibility check prior to assembly.
Compare the suspension dimensions of the fork carriage with those of the
ManuTel ® G2.
Compare the load chart of the industrial truck with the ManuTel
Determine the weight and load centre for the transport task.
n
n Check the load chart of the industrial truck with regard to the transport task.
n Check the load chart of the ManuTel
In the event of compatibility, carry out assembly.
The type of fork arm suspension may deviate from the image depending
on the industrial truck. Observe the operating manual for the industrial
truck.
WARNING!
Risk of injury from crushing!
Due to the considerable weight of the fork arms, crushing can result in
serious injuries. Note the following points in relation to all of the following
assembly, disassembly and adjustment tasks:
– Wear protective gloves.
– Carry out lifting and lowering of fork arms with care and prudence.
– Do not use force to open and close locking latches.
n Driver of industrial trucks
n Industrial helmet
Protective work clothing
n
n Protective gloves
n Safety shoes
n Lifting device
Prepare the lifting device for large loads, e.g. indoor crane and lifting straps. The
work is to be carried out by 2 people.
Move the fork carriage to the vertical position and move it to a height that allows for
safe and comfortable installation of the ManuTel
Remove the locking screw on the assembly side of the fork carriage.
®
ManuTel telescopic fork arm Type G2
Assembly and disassembly
®
G2 with regard to the transport task.
®
G2 on the fork carriage in the following order:
® G2.
Assembly
®
G2:
19