Table of Contents
Advertisement
Service specialist
The service specialist has a qualification in mechatronics or similar or has verifiably taken
part in training in which the necessary knowledge and procedures for safe performance of
assembly, installation, start-up and service on the ManuTel
The service specialist is familiar with the use of the ManuTel
gers.
The service specialist is capable of operating industrial trucks with a driver's seat or a
driver's platform thanks to their education, knowledge and experience. The service spe-
cialist is aware of the dangers involved with lifting and transportation tasks.
Only persons of whom it can be expected that the will carry out their duties reliably are
permitted as personnel. Persons whose ability to react is affected, for example, by drugs,
alcohol or medicine are not permitted.
When selecting personnel, note the age and occupation-specific regulations applicable at
the operation site.
2.7.2
Unauthorised persons
2.7.3
Training
The owner must train personnel on a regular basis. Execution of the training must be
logged for better traceability.
n
Date of training
n
Name of the trained person
n
Content of the training
n
Name of the instructor
n
Signatures of the trained person and of the instructor
V1.09/2019
WARNING!
Danger to life for unauthorised persons due to dangers in the
danger and work area!
Unauthorised persons, who do not meet the requirements described in
this manual, are not aware of the dangers in the work area. For this
reason, there is the danger of serious injuries and even death for unau-
thorised persons.
–
Keep unauthorised persons away from the danger and work area.
–
If in doubt, address such persons and direct them away from the
danger and work area.
–
Suspend work while there are unauthorised persons loitering in the
danger and work area.
®
ManuTel
telescopic fork arm Type G2
Safety
Personnel requirements> Training
®
G2 has been taught.
®
G2 and the associated dan-
15
Advertisement
Table of Contents
