Table of Contents
Advertisement
5. SECTION
PERIODIC MAINTENANCE
Protect the chamber against rust coming from outside.
5.1. Every Month
Cleaning
Clean the chamber while it is at room temperature, after unplugging the equipment.
After removing the shelves, wipe down the chamber surface to remove any undesirable
effects of the operations.
Mild detergent use is recommended to remove difficult dust and dirt.
Please be aware of the undesirable effects of the chemicals and be careful while applying
them.
WARNING: DO NOT SPRAY WATER OR OTHER LIQUIDS DIRECTLY ON ANY
PART OF EQUIPMENT. OTHERWISE THIS MAY CAUSE SERIOUSLY
ELECTRICAL DAMAGE.
5.2. Every Three Months
The cooling performance decreases if the condenser is dusty. Clean the condenser by vacuum
machine quarterly. (The period depends on the operating hours of the equipment and the dust
level of the working place.)
Note: In order to clean the condenser; open the right and left cover sheet with the key.
WARNING: SPRAYING WATER OR OTHER LIQUIDS DIRECTLY MAY CAUSE
SERIOUS DAMAGES.
5.3. Every Year
The electrical and mechanical components are extremely reliable and do not need periodic
maintenance. It is advisable to be checked the temperature and humidity calibrations, the
cooling system performance, alarm system's reliability by authorized technicians once a year.
6. SECTION
DISPOSAL MANAGEMENT CONCEPT
The currently valid local regulations governing disposal must be observed. It is in the
responsibility of the user to arrange proper disposal of the individual components. Applicable
local regulations for disposal have to be carefully observed.
The instruments and electronic accessories (without batteries, power packs etc.) must be
disposed off according to the regulations for the disposal of electronic components.
Batteries, power packs and similar power source have to be dismounted from
electric/electronic parts and disposed off in accordance with applicable local regulations.
18
Hide quick links:
Advertisement
Table of Contents
