Installing The Software Program; Installing Sharpdesk And Network Scanner Tool - Sharp MX-7001N Installation Manual

Installing the Software Program

Note the following when installing the software program from the CD-ROM:
●
Be sure to check the system requirements for installation of each of the software programs in the
user's guides and on the Information screen during installation.
●
The user's guides give detailed instructions for installing and setting up the programs. Be sure to
read the user's guides before installing the programs. In particular, if you are going to use
Network Scanner Tool, be sure to carefully read the instructions regarding network preparation
and setup procedures before installing the program. The network administrator should verify that
network preparation has been carried out correctly.
●
If you are going to send an original scanned with the Digital Laser Copier/Printer to a computer
(Scan to Desktop), Network Scanner Tool must be installed.
●
If you perform a standard installation of Sharpdesk (select "Typical" in the Setup Type selection
screen), Network Scanner Tool will be also be installed, alternatively you can also select
"Custom" installation and install only Network Scanner Tool.
●
If Internet Explorer 6.0 or later is not installed on your computer, see the installation procedure
for Internet Explorer in the Readme file (Readme_IE60SP1.txt) in the root folder of the "Disc 2"
CD-ROM.
●
If you intend to install SHARP TWAIN AR/DM, install Network Scanner Tool first. SHARP TWAIN
AR/DM cannot be installed alone.
●
The contents of the Information screens that appear during installation can also be found in the
ReadMe files on the same CD-ROM. The ReadMe file for Sharpdesk is located in the root folder
of the CD-ROM, and the ReadMe file for SHARP TWAIN AR/DM is located in the Twain folder.

Installing Sharpdesk and Network Scanner Tool

1
Quit any software applications and/or resident programs that are
running on your computer.
2
Insert the CD-ROM into your CD-ROM drive.
●
If you are installing the software in Windows 98/Me/2000/XP, insert the CD-ROM
that shows "Disc 1" on the front of the CD-ROM.
●
If you are installing the software in Windows Vista, insert the CD-ROM that shows
"Disc 2" on the front of the CD-ROM.
●
If the Sharpdesk installation screen appears, proceed to step 5.
3
Click the "start" button and then click "My Computer" (
●
In Windows 98/Me/2000, double click "My Computer".
●
In Windows Vista, click the "Start" button (
4
Double click the CD-ROM icon (
●
The Sharpdesk installer starts.
●
In Windows Vista, double click the CD-ROM icon, "Sharpdesk_Vista" folder, and
then "Setup.exe". The Sharpdesk installer starts.
Sharpdesk CD-ROM (for Windows)
) and then click "Computer".
).
).
3