Using The Remote Reception Function - Sharp MX-B201D Operation Manual

USING THE REMOTE RECEPTION FUNCTION

The machines Remote Reception feature is designed to allow you to activate fax reception from an extension
telephone. The Remote Reception function operates even when the FAX Signal Receive function is turned off. See
"SETTING UP THE MACHINE FOR USE WITH A PC MODEM" on page 36. When you hear the fax tone, simply
press the one-digit Fax Remote Number (Factory setting: 5) and
feature.
If you are not using a PC modem on the same line as your machine, and have not turned off the Fax Signal
Note
Receive function, you do not need to make any changes to the Remote Reception function. Simply use the
factory settings. The machine will automatically take over the line should you answer from the extension phone
and a fax tone is detected.
Turning on Remote Reception:
1
Press the [MENU] key.
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "14:REMOTE RECEPTION"
appears, and then press the [OK] key.
Selection
"14:REMOTE RECEPTION"
) or [ ] key ( )
) or [ ] key ( )
. Follow the procedure below to use this
4
Press the [ ] key (
to select "1:ON" or "2:OFF".
5
Press the [OK] key.
6
Press the [MENU] key.
INITIAL SETTINGS
) or [ ] key (
Press the [MENU] key to
exit.
37
)