15.
Remove the cushion from the new seat by taking out the three screws from the bottom front of the seat pan.
16.
Mount the seat to the swivel using four 5/16" x 5/8" socket head cap screws and 5/16" serrated flange nuts.
17.
Reinstall the seat cushion.
18.
If the suspension is air, connect it to a power source. Keyed power is recommended.
5/16" x 5/8" Socket
Head Cap Screw (4)
Technical Support
KM 402 Kit Air/Mech Installation (PN: 6793 & 6794)
5/16" Serrated
Flange Nut (4)
Phone: 1.800.328.1752 / Website: www.tractorseats.com
Installation Guide
8