Advertisement
8.
Bolt the 6080 SAP to the slide rails using four 5/16" x 3/4" flat head socket cap screws, three flat washers, and four
5/16" jam nuts. The three flat washers go in between the 6080 SAP and the slide rails as shown below.
5/16" Flat Washer (3)
5/16" Jam Nut (4)
Technical Support
Installation Guide
KM 402 Kit Air/Mech Installation (PN: 6793 & 6794)
Phone: 1.800.328.1752 / Website: www.tractorseats.com
3
5/16" Flat Head Socket
Cap Screw (4)
6080 SAP
KM MSG83 PN: 8079
or
KM MSG93 PN: 8080
Advertisement
