10.
Mount the JD PED W43 and suspension assembly to the back of the cab using the original bolts.
11.
Fasten the W43A or W43B plate, which ever is installed, to the cab deck where the holes were drilled in step 6.
Use two 5/16" x 3/4" and 5/16" serrated flange nuts for fasteners.
KM MSG83 PN: 8079
KM MSG93 PN: 8080
5/16" x 3/4" Bolt (2)
Technical Support
KM 402 Kit Air/Mech Installation (PN: 6793 & 6794)
or
Phone: 1.800.328.1752 / Website: www.tractorseats.com
Installation Guide
5
JD PED W43
PN: 6051
5/16" Serrated
Flange Nut (2)