HIKVISION ICVS User Manual page 25

Set Port Parameters
Step 1 Go to Device.
Step 2 Click Information Overview.
Step 3 Click Modify Network.
Step 4 Click Set of unbounded port to configure its network parameters.
 Port Name: Not editable.
 Jumbo Frame Size: Default value is 1500. Default value is recommended.
Create Bond
Step 1 Go to Device.
Step 2 Click Information Overview.
Step 3 Click Modify Network.
Step 4 Select ports to bind and click Create Bond.
 Select Mode: Rotating Mode, Active-standby Mode, XOR Mode,
Broadcasting Mode, 802.3ad Mode, TLB Mode, and Virtualized Mode are
selectable.
 Balanced Option: L2, L3, and L4 are selectable. L2 is default one and
recommended one.
 Bound port will be listed in lower half of the page.
 IP address of bound port is the same with the IP address of the first port.
ICVS User Manual
24