Table of Contents
Advertisement
Lotus RT
step 1a: Clamp install for thicker worksurfaces
• The clamp comes assembled to accommodate tables up to 1 ⅝" (41.27mm) thick and requires 3 / "
(96.52mm) of clearance behind the desk. If your table is thicker than 1 ⅝", continue with Step 1a.
If your desk is close to a wall and has limited space, ¼" to 3 / " (6.35mm to 96.4mm), move to
• Use two people to lift the base and worksurface out of the box. (Image A)
• On the clamp, loosen one screw and remove the other using the 4mm Allen Key (C). (Image B)
•
• Re-install screw and tighten the other screw. Ensure both screws are securely fastened.
Move to step 1b.
Image A
step 1b: clamp install with thin worksurface
• Use two people to lift the base and worksurface out of the box. (Image D)
• Remove the clamp using the 4mm Allen Key (C). (Image E)
• Place on the rear of the desk and re-install the clamp underneath the desk. Move to step 1c. (Image F)
Image D
Image B
c
Image E
c
Page 5
product assembly
Image F
c
Image C
c
Advertisement
Table of Contents
