Page 1
Lotus™ Sit Stand Workstation PLEASE READ INSTRUCTIONS BEFORE USE. LEES VÓÓR GEBRUIK DE INSTRUCTIES DOOR. DO NOT DISCARD. NIET WEGGOOIEN. LIRE LES INSTRUCTIONS AVANT UTILISATION. LÄS DESSA INSTRUKTIONER FÖRE ANVÄNDNING. NE PAS JETER. KASSERA EJ. LEA LAS INSTRUCCIONES ANTES DEL USO.
Workstation Cord Funnel Cable zip/tool Velcro Only compatible with Fellowes Monitor Arm Kit for Lotus. Visit www.Fellowes.com for more information. SET-UP STEP 1 Use 2 people to place the sit stand on your desk. Be sure that the front edge of the keyboard platform aligns with the desk edge.
Place your monitor, keyboard and mouse on the workstation. Use the enclosed Velcro to secure the monitor(s) to the workstation. raise the workstation to the highest position. Leave the monitor cover plate in place unless using the Fellowes Monitor Arm Kit for Lotus. CORD MANAGEMENT Ensure the workstation is at the highest position.
Patent pending Smooth Lift Technology™ makes it effortless to raise and lower your sit-stand. Place items onto the workstation and raise up to the highest position. Lotus is shipped at the lowest setting which will help offset 10lbs/4.5kg. Turn the knob clockwise to offset heavier weights, up to 29 full rotations to offset 35lbs/15.8kg.
Page 5
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to...