Section 2: Service Adjustments; Resetting The Tv To The Factory Defaults - Sony KDL-32FA500 Service Manual

2-1. RESETTING THE TV TO THE FACTORY DEFAULTS

Traditional Service Mode is not available in this chassis. The only option for service technicians is to reset all of the settings to the Factory Default from
the Self Diagnostic screen.
CAUTION: Resetting the TV to the Factory Defaults will over-write all customer settings. Before performing this reset, contact the customer to
determine what adjustments they have made.
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
Channel 5
DISPLAY
The Self Check list displays.
Results for all of the following diagnostic items are displayed at the bottom of the screen. No error has occurred if the screen displays a "0".
Resets all settings
to the Factory Defaults
Stored Data
from ADC calibration
(from factory)
Diagnostic
List
3. From the Self Diagnostic screen, select Factory Default button and then select Yes.
4. To start Auto Program, select Yes.
NOTE: Allow 30+ minutes for Auto Program to complete.
5. Using the customers information, reset their adjustments.
KDL-32FA500/37FA500

SECTION 2: SERVICE ADJUSTMENTS

Volume + TV POWER .
This is the SAME as accessing Service Adjustments.
Version: ER2.5L-AB14L DTT:32F5.P032.T004
Model Information:32FA500 4000493
Factory Default
ADC Auto Calibration
Cr
402
Gain
ITU 709
Offset
1020
Gain 412
ITU 601
Offset
1020
Gain
454
VGA
8
Offset
2:MAIN POWER 0
3:DC ALERT1 0
4:DC ALERT2 0
5:DC ALERT3 0
Power On Time: 00001H
SMPTE
ColorBar100
Y Cb
1560 404
128 1020
1600 420
128 1020
1856 462
8 8
6:BL
7:TEMP
8:Audio
101:WDT 0
Software Version
Model Information & Serial Number
Power Time
0
1
Indicates an error was detected
0 Indicates no error was detected
KDL-32FA500/37FA500
41