Epson EcoTank L120 Start Here page 3

Hide thumbs Also See for EcoTank L120:

Available languages

L120

Start Here

Unpack

Note:

The ink bottles and printer cables may be packed inside the product. The included ink bottles must be used for product setup and are not for resale.

Fill ink tanks

Note:

This product requires careful handling of ink. Wear plastic gloves and place a sheet of

paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If ink spills,

wipe it off immediately to avoid permanent stains. If ink gets on your clothes or belongings, it

may not come off.

Press the

the

power and

Load paper

Caution:

Replace bottle cap tightly, or ink may leak.

power button and wait until

cancel lights stay on.

Read these instructions before using your product.

Caution:

Do not open the ink bottles until you are ready to fill the ink tanks. The

ink bottles are vacuum packed to maintain reliability. Never place the product on

its side after the ink tanks are filled.

Warning:

Keep ink bottles out of the reach of children and do not drink the ink.

During initial setup, make sure to use the ink bottles that came with

your product and use all of the ink.

Fill each tank with the correct ink color.

Press and hold the

until the

takes approximately 20 minutes. Ink charging is

complete when the

cancel button for 3 seconds

power light starts flashing. Ink charging

power light stops flashing.