Features - Bavis Basic Manual Transaction Drawer 3 Installation And Service Manual

Features


The Basic Manual Transaction Drawer 3 is a reciprocating conveyor system for use in
package passing applications. Burglary, theft protection and bullet resistant features have not
been evaluated. The conveyor is designed to extend from the inside to the outside of a facility.
Mounting flanges are provided to secure the drawer assembly to the wall opening.
A night latch is provided.
The drawer frame is constructed of heavy 14 gauge steel with a durable powder coated finish.
Its large 25 pound capacity is suitable for commercial or convenience store transactions.
The bin of the drawer is powder coated with a bright red finish and features a stop sign decal that
is visible when the drawer is open. The drawer color and stop decal are designed to warn
customers not to approach when the drawer is open.
Full 14" extension of drawer.
No wiper or sliding type weather seals. Our seals are replaceable and operate in compression to
reduce wear and provide the best possible protection from the elements.
No belts or gearboxes are used.
No fuses to replace.
Customer audio components are built into removable panels on the drawer assembly's outside
face panel.
Almond counter top is standard. Other colors are available.
Clear interior door.
Sliding Bin Heater is optional.
Note: It is recommended that when using the audio system for this drawer in the
"Hands Free" mode, Speaker Phone mode or with an audio console, to close the
inside door when the drawer is extended out to the Customer, to minimize the
chance of "Feed Back" in the audio system. If Feed Back does occur with the
inside door closed, move the telephone base, or audio console further away from
the door opening and operator handle slot, and/or adjust the volume level to a
lower setting.
1