Completing Basic Checks; Resetting The Remote Commander - Sony NSZ-GS7 Service Manual

22. Using the arrow keys on the USB keyboard, move down the list
and highlight Show System Info.
Service Mode <Sat May 5 18:12:47 2012>
------------------------------------------------------
../
Measure WLAN RSSI
Show System Info
Show Safety Shutdown Registers
Reset Safety Shutdown Registers
Log Copy
Full Ini aliza on
23. Press ENTER.
Specific information about the Network Media Player, including the
current software package is displayed.
So ware Version
Package version:
Build version:
Recovery version:
BG2 - blind.chipid.otp:
Product F#. Serial:
Board A#. Serial:
MAC - Ether. WLAN.Bluetooth:
WIFI module version:
IR blaster version:
Keypad ID (paired):
24. Verify the latest software is installed.
25. To return to the Service Mode menu, press Enter.
26. To exit Service Mode, turn the Network Media Player OFF by
disconnecting the AC Power Cord.
27. Proceed to Completing Basic Checks.
NSZ-GS7/NSZ-GX70
SECTION 3 - UPDATES AND ADJUSTMENTS
S042812/M042812_SBT1042_i542/HC12154_3.2_
1348
$Change: 1803 $
T3_236475000 32BDCF4E367474AD. no-
Error 0401A1BWD040
Error 267
30:F9:ED:E5:1D:D9 E4:D5:3D:A0:5D:3C E
SD8787-14.66.9.p80-M2614310-GPL-(FP66)
2524-2524
00:01:90:F0:68:DC Error

COMPLETING BASIC CHECKS

Perform the following test to be sure the Network Media Player is functioning
properly
Complete before shipping:
; Test LAN, USB, HDMI Input, HDMI Output, and SPDIF
; Test Wi-Fi
; Test Bluetooth (Use Remote Commander)
; Test IR Blaster (test both internal and external -
use external IR Blaster Cable)
; Test Remote Commander
28. After completing the Basic Check List, proceed to Resetting the
Remote Commander.

RESETTING THE REMOTE COMMANDER

The steps for resetting the Remote Commander depend on wether or not
the original Remote Commander was or was not with the Network Media
Player when it was sent in for repair.
Verify before proceeding to the next step:
; Updated the Software
; Re-initialized the Network Media Player to Factory Mode
; Completed Basic Tests
29. Do one of the following:
a. If the original Remote Commander was with the Network
Media Player, proceed to Resetting the Original Remote
Commander.
b. If the original Remote Commander was not with the Network
Media Player, proceed to Resetting a New Remote
Commander.
28